Matériaux de plomberie
Tuyaux et raccords plastique:
Voici un exemple de tuyaux PER tel qu'il est utilisé dans la plomberie domestique, principalement utilisé pour l’alimentation en eau chaude et froide. En ce qui concerne la tuyauterie du chauffage central il est vraiment conseillé d'utiliser du tuyau multicouche qui contient une barrière interne empêchant la pénétration d'air dans le système de chauffage central. Le PER n’est seulement qu'un simple tube sans barrière interne, adéquat pour l’alimentation en eau chaude et froide. Voici deux exemples de PER et Multicouche:

  • Plastic pipe and fittings in France
Below is an example of PER pipe as used in domestic plumbing supplies in France, used really for Hot & Cold water, as for heating you really need to use Tube Multicouches which has a barrier inside the pipe to stop the ingress of air into the central heating system. PER is only a single pipe with no inside barrier, so only good for Hot & Cold water supplies. Below are the two examples of PER & Multicouche:
  • PER Multicouche et raccords Les raccords pour ces deux types de tubes sont très différents, les deux types offrant un joint robuste, sans joints en caoutchouc, réduisant ainsi le problème du joint torique qui pourrait présenter une fuite à l'avenir. Les raccords utilisés pour les PER sont soit de type à compression mis en place avec une sorte de clé à molette, soit des raccords à glissement, l'outillage pour ce type de joint étant assez cher et encombrant. Les raccords pour le multicouche sont à sertir ou de type à compression comme pour le PER. L'outil pour sertir le multicouche est également très cher et très encombrant.

  • PER & Multicouche fittings
The fittings for these two types of pipe PER & Multicouche are very much different, both types of fitting offer a very strong joint which is sealed with no rubber seals therefore reducing the problem of the O ring seal leaking in future, a weak point in a lot of modern push fit fittings. The fittings used for PER are either a compression type installed with spanners or a brass ring which is forced over a brass male fitting called à glissement (translates: with a sliding action) the tooling for this type of joint is quite expensive and cumbersome.The fittings for multicouche are called à sertir (translates: to crimp) or a compression type as for PER.The tool for the multicouche à sertir is also quite expensive and also very cumbersome.
Please see below for the type of fittings and tooling involved: 
 
Les tuyaux et raccords ci-dessus avec leurs outils respectifs sont seulement quelques-uns de ceux qui sont utilisés pour la plomberie. Nous avons fait notre choix en ce qui concerne les matériaux que nous utilisons pour Triskel Plomberie et sommes satisfaits des résultats. Nous sommes convaincus que nos clients français et britanniques sont en bonnes mains quand nous installons des matériaux neufs provenant de nos fournisseurs ici à Vannes.

N'hésitez pas à nous contacter avant de vous engager dans un projet de rénovation, nous nous ferons un plaisir de vous conseiller.

The pipes and fittings above with their related tooling are only a few of what the French use for plumbing installations here in France. We have made are choices to the French materials we use as Triskel Plomberie and are satisfied with the results. We are confident that our customers French & British are in good hands when we install their new plumbing materials from our suppliers here in Vannes.
Which leads me back to installations here in France, please do not hesitate to
contact us first before embarking on a renovation project, we would be only to glad to help you.  

Recommandations pour protéger votre habitation d’importants dégâts des eaux!